Old vs New Shotgun

Clay, Trap, Skeet Shooting Forum

Help Support Clay, Trap, Skeet Shooting Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mick P

New member
Joined
Mar 1, 2025
Messages
4
Hi This is my first posting here so please be gentle with me.

I am an old geezer who is still fighting fit, got my own hair and teeth and I have a couple of shotguns stashed away in the gun safe.

I used to shoot with a s/s hammer gun at a small straw bale clay pigeon shoot which folded up in 1986. There were 10 of us who scrounged a field from a local farmer but for some reason the club folded up. I was nagged rigid by the other shooters to shoot with an O/U and I gave into them and bought a new Miroku 7000SP1 about 3 months before the club folded. I have not shot since so it's a certainty that I have put less than 1000 cartridges through it.

I had the gun checked for gun fit by a "proper" gun repairer and he deemed it the perfect fit and it is multi choked.

I am retired and intend to take up shooting clays once the weather improves.

So the reason for being here is simply to ask, would you advise to keep the Miroku or should I buy something new with all the gizmos and steel proof barrels etc. The gunsmith advised keeping the old one.

Your advice would be appreciated.
 
Thanks Gentlemen, a 100% response for keeping the old one means that I will be keeping it.

Thanks for the replies, it is much appreciated.
 
A multichoked quality gun that fits you. What else do you need.
The steel proof is not relevant for you.
You can use any steelshot cartridge for clays in your gun.
 
A multichoked quality gun that fits you. What else do you need.
The steel proof is not relevant for you.
You can use any steelshot cartridge for clays in your gun.
I was sort of thinking of buying a B25 which seems to be going cheap nowadays. However like you say, what's the point. The old gun is almost new, and will last me out. To be honest I got the answers I was hoping for.
 
I was sort of thinking of buying a B25 which seems to be going cheap nowadays. However like you say, what's the point. The old gun is almost new, and will last me out. To be honest I got the answers I was hoping for.
A friend GAVE me a B25 two weeks ago! It's choked Full & 3/4, and it's great for dusting clays. However, I'm wondering about the move to steel shot and whether I need to have it reamed out a touch. But until then, I'll carry on. [Yes, GAVE! That's a true friend.]
 
Another question if I may, the Miroku is fitted with chrome lined barrels, will that be ok with steel shot?

Although I have 5 multi chokes, I always used 1/4 and 1/2 if that helps .
 
Another question if I may, the Miroku is fitted with chrome lined barrels, will that be ok with steel shot?

Although I have 5 multi chokes, I always used 1/4 and 1/2 if that helps .
Steel shot will always be enclosed in a full cup wad ,and therefore should never touch the barrel so all is still good for you . In practical use you may find that your chokes will pattern tighter with steel . I’ve got some Invector + that came with a 2023 Miroku I own , and they have two markings , something like 1/4 lead / 1/2 steel .
 

Latest posts

Back
Top