Brilliant ! You will enjoy it . Once you get into the swing of it I guarantee you will pull off some shots that will stagger you . The clays come so thick and fast that you won’t overthink you’ll just shoot .
What did you do today that’s shooting related?
- Thread starter Jayzeable
- Start date
Help Support Clay, Trap, Skeet Shooting Forum:
Jayzeable
Well-known member
- Joined
- May 18, 2017
- Messages
- 53
Cheers. I hope so @MartynB ...I feel like I've been so limited with shoot time this past year, and to be truthful I've hardly managed to get out for any shooting at all... I did a Simulated Game Day last year and I was blown away how well someone can shoot without the psychological 'Count Down' clock in your head. Point and shoot....
On this SimDay, I'm a single gun, apparently, if they don't find another gun to make up the even numbers, they supply the loader at no extra cost too. Cool.
Doctor Lecter
Well-known member
ouch !
got the grass cut today , gives me time to meet the gang at grimsthorpe tomorrow 100 esp grimsthorpe in Lincolnshire superb ground give it a go , if your ever over this way !!!
Jayzeable
Well-known member
- Joined
- May 18, 2017
- Messages
- 53
I bought a ‘ThoMar’ multi dry dehumidifier this week and hung it in the gun cabinet today.
It’s sold as a reusable type, it weighs around 1kg and can be regenerated on a radiator or oven, after absorbing 600g of moisture.
Fingers crossed it works as advertised.
It’s sold as a reusable type, it weighs around 1kg and can be regenerated on a radiator or oven, after absorbing 600g of moisture.
Fingers crossed it works as advertised.
AW13
Well-known member
Been shooting my B725 for quite a while so today I brought out my Benelli for a bit of exercise, lovely light gun
Season starts in three weeks time. I have never shot my gun since last September so I got her out wiped down with an oily rag and took a photo... then put her back in the case. Had her six years now 
she is 30 years old and still just a beautiful gun!
she is 30 years old and still just a beautiful gun!
Will Hewland
Well-known member
Last edited by a moderator:
LeedsZeppelin
Member
Filling a pair of the missus' tights with kitty litter (remove the missus first) does the job just as well.I bought a ‘ThoMar’ multi dry dehumidifier this week and hung it in the gun cabinet today.
It’s sold as a reusable type, it weighs around 1kg and can be regenerated on a radiator or oven, after absorbing 600g of moisture.
Fingers crossed it works as advertised.
Running leaky classic cars taught me that trick.
Its a strange one Will but most clubs close beginning of September and re-open Feb/March . Of course I shoot trap I am sure the sporting clubs will be open. The weather has been so bad so far this winter that the chances to get out shooting have been few and far between anyway. I get the impression that shooting clays is something the French do when they cannot blast the hell out of fur and feather so when the hunting season starts, usually late August , the clay season ends :lol:
Today I bought a pack of mixed grade sandpaper to start preparing the woodwork on a Cooey 84 for my grandson. Every intention of a couple of hours work this afternoon.
Unpacking my shopping bag the pack fell into the sink with the pots and got soaked.
That was enough for today, I had a sleep instead.
Tomorrow is another day.
Unpacking my shopping bag the pack fell into the sink with the pots and got soaked.
That was enough for today, I had a sleep instead.
Tomorrow is another day.
Wonko the Sane
Well-known member
It's my understanding that the French would have the world believe that everything breeds in France and does it in a manner superior to anyone/anywhere else. Appears to be something of a national delusion. Less disturbing but much like a number of delusions that are rampant in the US
And John - so you did go for that goofy stock !!!
oke: Shirley you shot it before you put it away and a report is def due - - - just about now!
Martinj
Well-known member
There is a pithy expression of wisdom regarding our friends across the channel - if it moves they eat it, if it doesn't move they make love to it
and don't call me Shirley!
and don't call me Shirley!
Last edited by a moderator:
Today I finally started the strip down on the Cooey model 84 to began its restoration, shortening, rebuilding and fitting for my grandson.
I roughly marked the butt for cutting before stripping down and thoroughly cleaning, checking and noting any worn parts. Ironed out any little dents before gently rubbing out any scratches, nicks and chips and removing old varnish.
Work so far, in progress.
I roughly marked the butt for cutting before stripping down and thoroughly cleaning, checking and noting any worn parts. Ironed out any little dents before gently rubbing out any scratches, nicks and chips and removing old varnish.
Work so far, in progress.
Last edited by a moderator:
Today, I gave the metal parts a boil wash, followed by white spirit cleaning. They're now soaking in WD40 prior to being dried, oiled or greased as appropriate and reassembled.
The woodwork cutting and rubbing down is complete and the first coat of wood stain in place.
A plate has been cut to fit and smoothed and is ready for the final fit.
Still in progress:
The woodwork cutting and rubbing down is complete and the first coat of wood stain in place.
A plate has been cut to fit and smoothed and is ready for the final fit.
Still in progress:
Last edited by a moderator:
Today I washed 2 pairs of moleskin breeks. I thought the clanking in the washer was just the brass buckles on the knees . I was wrong , a 32gm # 5 Hull High Pheasant Extreme came out quite nicely laundered ...... thank goodness the crimp didn’t open , the thought of 300 odd pellets going into the gubbins of the ( new last week ) washer wasn’t worth thinking about . 
Lloyd
Well-known member
3D Printed butt pad for the F16.
It’s 1/2” shorter than the standard pad to give me 14 1/4” LoP and adds 3 degrees of pitch.
While there is no compliance in the pad, it’s unlikely to be a bother as I’ve been shooting sans pad the last few times out to experiment with gun fit without spending the money to cut 1/2” off the stock and I haven’t had any recoil issues at all.
I do get a fair amount of muzzle flip especially with 3/4 chokes, so the extra pitch should help hopefully.
It’s 1/2” shorter than the standard pad to give me 14 1/4” LoP and adds 3 degrees of pitch.
While there is no compliance in the pad, it’s unlikely to be a bother as I’ve been shooting sans pad the last few times out to experiment with gun fit without spending the money to cut 1/2” off the stock and I haven’t had any recoil issues at all.
I do get a fair amount of muzzle flip especially with 3/4 chokes, so the extra pitch should help hopefully.
Old fashioned I am, basic tools, no fancy stuff for meYou made a nice job cutting that stock with that axe and sythe on the bench there
Rubbed down stained and varnished now, needs another rub and varnish to complete:
Last edited by a moderator:
I finished the COOEY today and I'm happy with it.
Taking it out tomorrow to put a range of different size cartridges through it. Not so much for pattern as it is what it is with fixed full choke. I need to know the recoil on each shot and what range I can reasonably expect to break clays for the little one.
With an eye to the future as they grow so rapidly plus his mum fancies having a go with it, I've started the inevitable extension as a removable part. It needs a plate fashioning for it yet, but I know I have an old BSA plate I can grind down. Then its rub down, stain and varnish again.
Obviously it will be fully pushed home, the second picture is just to show how it will fit.
Proud Grandad and his little man when he fired it Sunday.
Taking it out tomorrow to put a range of different size cartridges through it. Not so much for pattern as it is what it is with fixed full choke. I need to know the recoil on each shot and what range I can reasonably expect to break clays for the little one.
With an eye to the future as they grow so rapidly plus his mum fancies having a go with it, I've started the inevitable extension as a removable part. It needs a plate fashioning for it yet, but I know I have an old BSA plate I can grind down. Then its rub down, stain and varnish again.
Obviously it will be fully pushed home, the second picture is just to show how it will fit.
Proud Grandad and his little man when he fired it Sunday.
