Beretta Stock Height

General Skanky · Nov 4, 2024

Saw on a YouTube that Berettas tend to have higher stock and comb height.

Is this generally correct?

Thanks.

Westward · Nov 4, 2024

Not in my experience TBH, but it depends on the individual and also what it's being compared with. The main reason I shoot a fixed stock CG is because (for me) they have a higher comb than fixed stock Berettas which are a little too low for me.

General Skanky · Nov 4, 2024

Thanks.

jasper · Nov 4, 2024

Nope. Berettas are low. The factory has different fixed height options which the importer chooses not to bring to the UK. If you want a beretta I'd recommend buying one with the factory adjustable comb. These usually run around £200 more than the fixed comb guns.
Get it set properly then throw away the adjustment tools.

Yorkshire Clay Shooting · Nov 5, 2024

jasper said:
Nope. Berettas are low. The factory has different fixed height options which the importer chooses not to bring to the UK. If you want a beretta I'd recommend buying one with the factory adjustable comb. These usually run around £200 more than the fixed comb guns.
Get it set properly then throw away the adjustment tools.

But how do you adjust it after you have had a bad performance if you have thrown the tools away

k80ben · Nov 5, 2024

Currently they’re coming with way too much drop. The adjustable stock option is the worst one. Go for a parallel trap stock option then u can always have it filed down. I fit so many a week and have to remove the hardware and level it up

JoostB · Nov 5, 2024

Just out of interest; why is the adjustable stock the worst one? That is if you just fit it once and then don’t alter it anymore afterwards.

westley · Nov 5, 2024

k80ben said:
Currently they’re coming with way too much drop. The adjustable stock option is the worst one. Go for a parallel trap stock option then u can always have it filed down. I fit so many a week and have to remove the hardware and level it up

Do you throw the hardware in the same shed that is full of barrel weights ?
Let me know when you require a scrap metal merchant..........you could have a lovely goldfish for it !

Goldfinch · Nov 5, 2024

Some 694s have 35/50mm drop, 5mm higher at heel than typical.

k80ben · Nov 5, 2024

Goldfinch said:
Some 694s have 35/50mm drop, 5mm higher at heel than typical.

Correct the drop doesn’t alter by the adjustable comb. You remove it pack out the back then re screw

Freddypip · Nov 5, 2024

The 35/50 is very good but even then an adjustable to helpful re height and cast.

k80ben · Nov 5, 2024

Freddypip said:
The 35/50 is very good but even then an adjustable to helpful re height and cast.

35/50 is very very bad

Freddypip · Nov 5, 2024

Explain please Ben. Probably should have said - for me.

k80ben · Nov 5, 2024

Freddypip said:
Explain please Ben. Probably should have said - for me.

Modern day shooting and fit will see virtually parallel combs on all guns. 6/7mm would be a huge amount 15 is too much for anyone putting for me on it doesn’t change the fact it’s a terrible. Under for virtually anyone that isn’t shooting into a window at eye height only

Jonny English · Nov 5, 2024

k80ben said:
Modern day shooting and fit will see virtually parallel combs on all guns. 6/7mm would be a huge amount 15 is too much for anyone putting for me on it doesn’t change the fact it’s a terrible. Under for virtually anyone that isn’t shooting into a window at eye height only

Just out of interest Ben, what sort of dimensions do you have on your own stock? Or what are the most common sets of dimensions you see these days when you do your gun fits?

Thanks

SBL · Nov 7, 2024

I’ve got the adjustable 694 and it’s 35/55 as standard. I’m using it at 35/37. I managed it without packing it out but it’s right on its limit I’d guess.

Dickyboy · Nov 24, 2024

We are all different
My 682 Gold is 35/50 and it’s too high for me , I drop all my autos to 60mm at heel

k80ben · Nov 24, 2024

Dickyboy said:
We are all different
My 682 Gold is 35/50 and it’s too high for me , I drop all my autos to 60mm at heel

We are all different for sure but there not a man born of his own mother who fit those numbers

General Skanky · Nov 25, 2024

Dickyboy said:
We are all different
My 682 Gold is 35/50 and it’s too high for me , I drop all my autos to 60mm at heel

Do you mean you shim your Beretta semi auto all the way down?

Dickyboy · Nov 25, 2024

General Skanky said:
Do you mean you shim your Beretta semi auto all the way down?

Yes 60mm shim

Beretta Stock Height

Help Support Clay, Trap, Skeet Shooting Forum:

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Active member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Member

Well-known member

Well-known member

Member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!