Beretta Stock Height

[General Skanky]

Saw on a YouTube that Berettas tend to have higher stock and comb height.

Is this generally correct?

Thanks.

 

[Westward]

Not in my experience TBH, but it depends on the individual and also what it's being compared with. The main reason I shoot a fixed stock CG is because (for me) they have a higher comb than fixed stock Berettas which are a little too low for me.

 

[General Skanky]

Thanks.

 

[jasper]

Nope. Berettas are low. The factory has different fixed height options which the importer chooses not to bring to the UK. If you want a beretta I'd recommend buying one with the factory adjustable comb. These usually run around £200 more than the fixed comb guns.
Get it set properly then throw away the adjustment tools.

 

[Yorkshire Clay Shooting]

Nope. Berettas are low. The factory has different fixed height options which the importer chooses not to bring to the UK. If you want a beretta I'd recommend buying one with the factory adjustable comb. These usually run around £200 more than the fixed comb guns.
Get it set properly then throw away the adjustment tools.

But how do you adjust it after you have had a bad performance if you have thrown the tools away

 

[k80ben]

Currently they’re coming with way too much drop. The adjustable stock option is the worst one. Go for a parallel trap stock option then u can always have it filed down. I fit so many a week and have to remove the hardware and level it up

 

[JoostB]

Just out of interest; why is the adjustable stock the worst one? That is if you just fit it once and then don’t alter it anymore afterwards.

 

[westley]

Currently they’re coming with way too much drop. The adjustable stock option is the worst one. Go for a parallel trap stock option then u can always have it filed down. I fit so many a week and have to remove the hardware and level it up

Do you throw the hardware in the same shed that is full of barrel weights ?
Let me know when you require a scrap metal merchant..........you could have a lovely goldfish for it !

 

[Goldfinch]

Some 694s have 35/50mm drop, 5mm higher at heel than typical.

 

[k80ben]

Some 694s have 35/50mm drop, 5mm higher at heel than typical.

Correct the drop doesn’t alter by the adjustable comb. You remove it pack out the back then re screw

 

[Freddypip]

The 35/50 is very good but even then an adjustable to helpful re height and cast.

 

[k80ben]

The 35/50 is very good but even then an adjustable to helpful re height and cast.

35/50 is very very bad

 

[Freddypip]

Explain please Ben. Probably should have said - for me.

 

[k80ben]

Explain please Ben. Probably should have said - for me.

Modern day shooting and fit will see virtually parallel combs on all guns. 6/7mm would be a huge amount 15 is too much for anyone putting for me on it doesn’t change the fact it’s a terrible. Under for virtually anyone that isn’t shooting into a window at eye height only

 

[Jonny English]

Modern day shooting and fit will see virtually parallel combs on all guns. 6/7mm would be a huge amount 15 is too much for anyone putting for me on it doesn’t change the fact it’s a terrible. Under for virtually anyone that isn’t shooting into a window at eye height only

Just out of interest Ben, what sort of dimensions do you have on your own stock? Or what are the most common sets of dimensions you see these days when you do your gun fits?

Thanks

 

[SBL]

I’ve got the adjustable 694 and it’s 35/55 as standard. I’m using it at 35/37. I managed it without packing it out but it’s right on its limit I’d guess.

 

[Dickyboy]

We are all different
My 682 Gold is 35/50 and it’s too high for me , I drop all my autos to 60mm at heel