General Skanky
Well-known member
- Joined
- Jul 22, 2024
- Messages
- 84
Saw on a YouTube that Berettas tend to have higher stock and comb height.
Is this generally correct?
Thanks.
Is this generally correct?
Thanks.
But how do you adjust it after you have had a bad performance if you have thrown the tools awayNope. Berettas are low. The factory has different fixed height options which the importer chooses not to bring to the UK. If you want a beretta I'd recommend buying one with the factory adjustable comb. These usually run around £200 more than the fixed comb guns.
Get it set properly then throw away the adjustment tools.
Do you throw the hardware in the same shed that is full of barrel weights ?Currently they’re coming with way too much drop. The adjustable stock option is the worst one. Go for a parallel trap stock option then u can always have it filed down. I fit so many a week and have to remove the hardware and level it up
Correct the drop doesn’t alter by the adjustable comb. You remove it pack out the back then re screwSome 694s have 35/50mm drop, 5mm higher at heel than typical.
35/50 is very very badThe 35/50 is very good but even then an adjustable to helpful re height and cast.
Modern day shooting and fit will see virtually parallel combs on all guns. 6/7mm would be a huge amount 15 is too much for anyone putting for me on it doesn’t change the fact it’s a terrible. Under for virtually anyone that isn’t shooting into a window at eye height onlyExplain please Ben. Probably should have said - for me.
Just out of interest Ben, what sort of dimensions do you have on your own stock? Or what are the most common sets of dimensions you see these days when you do your gun fits?Modern day shooting and fit will see virtually parallel combs on all guns. 6/7mm would be a huge amount 15 is too much for anyone putting for me on it doesn’t change the fact it’s a terrible. Under for virtually anyone that isn’t shooting into a window at eye height only
Enter your email address to join: