General Skanky
Well-known member
- Joined
- Jul 22, 2024
- Messages
- 84
Saw on a YouTube that Berettas tend to have higher stock and comb height.
Is this generally correct?
Thanks.
Is this generally correct?
Thanks.
Beretta Stock Height
- Thread starter General Skanky
- Start date
Help Support Clay, Trap, Skeet Shooting Forum:
Not in my experience TBH, but it depends on the individual and also what it's being compared with. The main reason I shoot a fixed stock CG is because (for me) they have a higher comb than fixed stock Berettas which are a little too low for me.
General Skanky
Well-known member
- Joined
- Jul 22, 2024
- Messages
- 84
Thanks.
Nope. Berettas are low. The factory has different fixed height options which the importer chooses not to bring to the UK. If you want a beretta I'd recommend buying one with the factory adjustable comb. These usually run around £200 more than the fixed comb guns.
Get it set properly then throw away the adjustment tools.
Get it set properly then throw away the adjustment tools.
But how do you adjust it after you have had a bad performance if you have thrown the tools away
Do you throw the hardware in the same shed that is full of barrel weights ?
Let me know when you require a scrap metal merchant..........you could have a lovely goldfish for it !
k80ben
Well-known member
- Joined
- Sep 19, 2011
- Messages
- 439
Correct the drop doesn’t alter by the adjustable comb. You remove it pack out the back then re screw
- Joined
- Jan 15, 2020
- Messages
- 617
The 35/50 is very good but even then an adjustable to helpful re height and cast.
k80ben
Well-known member
- Joined
- Sep 19, 2011
- Messages
- 439
35/50 is very very bad
- Joined
- Jan 15, 2020
- Messages
- 617
Explain please Ben. Probably should have said - for me.
k80ben
Well-known member
- Joined
- Sep 19, 2011
- Messages
- 439
Modern day shooting and fit will see virtually parallel combs on all guns. 6/7mm would be a huge amount 15 is too much for anyone putting for me on it doesn’t change the fact it’s a terrible. Under for virtually anyone that isn’t shooting into a window at eye height only
Jonny English
Well-known member
Just out of interest Ben, what sort of dimensions do you have on your own stock? Or what are the most common sets of dimensions you see these days when you do your gun fits?
Thanks
- Joined
- Jan 8, 2023
- Messages
- 121
I’ve got the adjustable 694 and it’s 35/55 as standard. I’m using it at 35/37. I managed it without packing it out but it’s right on its limit I’d guess.
