Doctor Lecter
Well-known member
what's the best fixed choked sporting shotgun on the market today ?
fixed choke
- Thread starter Doctor Lecter
- Start date
Help Support Clay, Trap, Skeet Shooting Forum:
Miroku mk60 grade 5 my goto game gun 
Value for money.........Miroku.
A more expensive option........Perazzi.
A more expensive option........Perazzi.
A used Miroku MK38 trap gun . Not a thing on it is adjustable ( some do have an adjustable comb ) . Take it to Teague Precision for thin wall chokes or have both barrels opened up to 015. “ choke . Personally I find the stock drop is better for me straight out of the box than the MK60 but that is personal , and I shoot a 20g MK60 for game , but have had the stock bent up .
I think with steel shot looking like it’s unavoidable that all Mirokus are now made new with multichokes .
I think with steel shot looking like it’s unavoidable that all Mirokus are now made new with multichokes .
Last edited by a moderator:
Doctor Lecter
Well-known member
ah sorry should have said for clay pigeon shooting !Miroku mk60 grade 5 my goto game gun
32" M Spec.
jonz
Well-known member
Even as a committed Beretta user I would have to say the best value for money has got to be a Miroku
Another one for Miroku being best value. I heard years ago that every fixed choke gun is regulated before it leaves the factory. Whether that’s true or not or even if they still do it I don’t know. What I do know is that I’ve had 5 fixed choke Mirokus over the years and they all have thrown excellent patterns. Another one for Perazzi if you want to pay a lot more money.
- Joined
- Jan 15, 2020
- Messages
- 617
I'm sure this is not the right thing to say - but maybe it's the best multi-choke gun where you don't change the chokes !!
On a serious point - I think manufacturers spec multi chokes because they are more cost effective to produce with cheap & good CNC etc ??.
On a serious point - I think manufacturers spec multi chokes because they are more cost effective to produce with cheap & good CNC etc ??.
Bebo
Well-known member
Kreighoff K80 Parcours in my opinion. Not to everyone's taste though.
I was recently quoted almost £1000 for Teague choking a Miroku MK38 with 5 chokes. That included shipping costs too. Something about MK 38 being one of the most difficult to do for some reason.
I have an MK 38 Sporter that is fixed choke 3/8 and 3/8. It is a multi choke, I just don't change them !
Last edited by a moderator:
I asked Ivan a couple of years ago if Teague could fit screw chokes to an M Spec. Much the same story; depends on the barrel wall thickness. Some you can, some you can't.
Didn't a member on have trouble with his Teague choked Miroku that was fixed then Multi choked by them.
Yes , Ant did , but There have probably been more Miroku conversions than any other make .I’ve probably put a minimum 20,000 rounds through my current 38, and 5000 through the 20g conversion . I had another 38 converted 25 years ago and probably put 50,000 rounds through it before I got it in my head I wanted to sell it to fund something else .
When I took the current guns down to Teague Precision to be converted , quite rightly they measured the muzzle walls to ensure that there was sufficient material to meet their machining parameters . There is significantly less metal in the fixed choke muzzles than there is in the factory multi-choke
The trap started at a nominal 3/4 and Full , the 60 20g at a nominal 1/4 and 3/4 .
When I took the current guns down to Teague Precision to be converted , quite rightly they measured the muzzle walls to ensure that there was sufficient material to meet their machining parameters . There is significantly less metal in the fixed choke muzzles than there is in the factory multi-choke
The trap started at a nominal 3/4 and Full , the 60 20g at a nominal 1/4 and 3/4 .
Paul120
Well-known member
Browning B25s can be a bit touch an go as the barrels are really close together at the muzzle. I think mine must have been borderline.
chippy
Well-known member
A 2nd hand Beretta 682 trap x if you can find one.
bugsey hogan
Well-known member
- Joined
- Oct 12, 2013
- Messages
- 107
Yep mine too obviously can’t have extended as not enough room for the knerled collars
