Recoil pad for B325

[Forestry-gunn]

Evenings everyone, 

I've got a Browning 325 which actually fits me well but it's got the standard plastic butt end on it and was wondering about putting a recoil pad on it. I have 3 questions which I hope someone can help. 

1. has a recoil pad improved your shooting?

2. Where can I get one for a 325

3. What one to get? Internal or sleeve? Make? Money? 

Hope someone can help cheers

 

[Will Hewland]

You won't get an off the shelf one to fit, it will need fitting. (New B525,pads are available, but not sure if they will fit a 325) Anyway if the gun is the right length now, you should get the stock shortened to accommodate a 19mm or similar pad. Thin ones don't do as much to reduce recoil of course.

See recoil systems website. The green pad is the best. They do a custom fit service, which is expensive, or get a local gunsmith to profile it.

 

[jasper]

+1 for the green pad . Excellent. This one will improve you. Look at the slow Mo video on recoil systems website

Jasper

 

[Skeet UK]

Yep, ISIS green pad or X Pad. I have the full recoil reducer on my Beretta, with green pad at the back.

If you don't like the green, it comes with a decent black marker to colour it in...smells good too!

http://www.recoilsystems.com

 

[Tron]

Xpad is the way to go!  But, anything you decide on will need to be ground to fit.

Jb

 

[donna]

agree with the above, Isis or X pad, I have one and Phil has the other, both work brilliantly and you couldn't get a better guy to deal with than Dave.  Just make sure it's fitted properly as the guys said.  I personally wouldn't have a gun without one of these pads on now I've got one.  Good luck in whatever you go for.

 

[Mick Shaw]

If it fits well I would leave it alone, you may make things worse. :bye:

 

[Forestry-gunn]

If it fits well I would leave it alone, you may make things worse. :bye:

Thats what I'm worried about, gunsmith said I could lose about an inch to make it fit 100% so this is why I was thinking if I get it cut to fit maybe put a proper pad on it

 

[Skeet UK]

X Pad then