Response to our frequently asked question on Clenzoil:
- Thread starter Michelle Pulling
- Start date
Help Support Clay, Trap, Skeet Shooting Forum:
optima
Well-known member
Recieved my free sample today,duck shooting tonight,clays sunday and possibly tomorrow so gun will have a special make over with clenzoil sunday night seeing as it ain,t been cleaned for a while,that should be a good test :smile:
jake.keeling
Well-known member
I've done my guns with it, but I want to see some long term performance, I have a DT10L that rusts easy, so we will see if its better than Napier.
sibaldib
Well-known member
Just got in from a partridge shoot this morning. I cleaned my Beretta in the normal way, with Napier and patches. Not much came out as I only fired a handful of shots this morning, after cleaning it last week.
Just as a test I soaked a patch with some Clenzoil and put it down both barrels and left it for 5 minutes.
When I then swabbed it out I was amazed how much muck came out. Pretty impressive stuff. I have also coated the gun with a thin film and like Jake, I will see how it fares long term during the game season when it get subjected to rain, hail, snow and mud!
Just as a test I soaked a patch with some Clenzoil and put it down both barrels and left it for 5 minutes.
When I then swabbed it out I was amazed how much muck came out. Pretty impressive stuff. I have also coated the gun with a thin film and like Jake, I will see how it fares long term during the game season when it get subjected to rain, hail, snow and mud!
E
Emmsy
Guest
is it ok on nickel? i know the 009 stuff eats it
sibaldib
Well-known member
Actually that's a point well made Mick.
I will try that next time and see if there is a difference.
Michelle Pulling
Active member
Good Morning All,
I thought I'd feedback the answers to one of the queries highlighted before and I can now confirm 100% that there is absolutely NO ACETONE in Clenzoil!!
Regards
Shelley
Michelle Pulling
Active member
Hi @shortlegs
Just to let you know we acquired a new Clenzoil stockist for South Wales on Monday this week.
Their details are as follows:
heinnie.com
Phone: 033 0300 0400
Fax: 033 0300 0401
Heinnie Haynes
Units 4-6 Windmill Industrial Estate
Wimborne Road
BARRY
CF63 3DH
United Kingdom Office Hours
Mon - Fri 09:00 - 17:30
Sat 09:00- 13:00
Sun Office Closed Showroom Hours
Sat / Sun / Mon - Showroom CLOSED
Tue - Fri 09:30 - 16:30
Please phone before your visit, so that we can
arrange for your item to be picked from the warehouse.
Regards
Shelley
Just to let you know we acquired a new Clenzoil stockist for South Wales on Monday this week.
Their details are as follows:
heinnie.com
Phone: 033 0300 0400
Fax: 033 0300 0401
Heinnie Haynes
Units 4-6 Windmill Industrial Estate
Wimborne Road
BARRY
CF63 3DH
United Kingdom Office Hours
Mon - Fri 09:00 - 17:30
Sat 09:00- 13:00
Sun Office Closed Showroom Hours
Sat / Sun / Mon - Showroom CLOSED
Tue - Fri 09:30 - 16:30
Please phone before your visit, so that we can
arrange for your item to be picked from the warehouse.
Regards
Shelley
Les53,,,,,,I will take four bottles at half price, and if I'm not totally satisfied I will return it for what it would be fully worth, had it been on sale at the full price ten or more days in the previous six weeks. I would also like 48 months interest free credit with nothing to pay for the first year.
What do you say ? Think it will fly off the shelves now.
What do you say ? Think it will fly off the shelves now.
ips
Well-known member
- Joined
- Jul 19, 2012
- Messages
- 15,642
jake.keeling
Well-known member
Hi, on the trigger guard and anywhere my hands touch the raw engraved steel. I have a normal DT10 and this is a lot more resistant because of the nickel finish or whatever it is. I spoke to GMK about it asking why a more expensive gun rusts quicker and they said the steel needed to be like that for the fine engraving..? Mainly solved the problem with thin layer of grease, done it with the Clenzoil now so we'll see.
ips
Well-known member
- Joined
- Jul 19, 2012
- Messages
- 15,642
Cant say I have noticed anything on mine apart from maybe a little bit on the face of the ejectors but too be honest not sure if it is surface rust or just powder residue / stain from the cheditte cartridges I have been using up. Gonna have a good look at mine tonight.
Thanks
Thanks
Michelle Pulling
Active member
Thanks for given Clenzoil an opportunity to shine.. may I just add some info on the grease?
Hope that helps explain why you'd have nothing to lose in trying it and evening to gain with problems such as Jake has had.
Shelley
- Our Hinge Pin Jelly (HPJ) is a completely unique product.
- There is no other grease available on the market which actively inhibits rust! Other greases will prevent rust because they form a seal over the surface and so prevents air from getting in, however once they have been removed from the surface it will start to rust again.
- Because our Hinge Pin Jelly contains an active rust inhibitor, it will prevent rust EVEN when it has all but been removed from the surface.
- Hinge Pin Jelly is so EFFICIENT, only a tiny amount needs to be used on hinges, chokes and firing pins ect.
Hope that helps explain why you'd have nothing to lose in trying it and evening to gain with problems such as Jake has had.
Shelley
jake.keeling
Well-known member
Do you do samples of that Shelley?Thanks for given Clenzoil an opportunity to shine.. may I just add some info on the grease?
- Our Hinge Pin Jelly (HPJ) is a completely unique product.
- There is no other grease available on the market which actively inhibits rust! Other greases will prevent rust because they form a seal over the surface and so prevents air from getting in, however once they have been removed from the surface it will start to rust again.
- Because our Hinge Pin Jelly contains an active rust inhibitor, it will prevent rust EVEN when it has all but been removed from the surface.
- Hinge Pin Jelly is so EFFICIENT, only a tiny amount needs to be used on hinges, chokes and firing pins ect.
Hope that helps explain why you'd have nothing to lose in trying it and evening to gain with problems such as Jake has had.
Shelley
Michelle Pulling
Active member
@
Hi Jake,
I do samples for the Clenzoil solution but not for the grease.
The grease comes in 0.25 oz jars so you can appreciate its going to be difficult to sample a jar so small.
For anyone who hasn't yet grabbed a FREE SAMPLE of the oil, I charge a quid to cover the postage which I refund back to you on a purchase.
Shelley
Hi Jake,
I do samples for the Clenzoil solution but not for the grease.
The grease comes in 0.25 oz jars so you can appreciate its going to be difficult to sample a jar so small.
For anyone who hasn't yet grabbed a FREE SAMPLE of the oil, I charge a quid to cover the postage which I refund back to you on a purchase.
Shelley
