My friend uses one, and informs the ref on every stand when shooting in comps.I do, as do several others. They’re not banned by the CPSA, only the ISSF for events under their jurisdiction.
My friend uses one, and informs the ref on every stand when shooting in comps.I do, as do several others. They’re not banned by the CPSA, only the ISSF for events under their jurisdiction.
Question to you and to @Jan Powell - If you have pulled the trigger, is there a way to mechanically avoid the shot going off before release, or would you just have to release the trigger and accept that the gun fires?My friend uses one, and informs the ref on every stand when shooting in comps.
I've done a grand total of 1 registered ABT shoot and 1 registered DTL shoot. The pegs are 3m apart centre to centre. If you hit with the first barrel, you open your gun, discharge your spent cartridge and leave the one in the second barrel while you move. It's not like wandering around a sporting shoot with a cartridge in an open barrel, you're only shuffling sideways about 3 steps (even for someone with short legs like me).Excuse my ignorance, I've never shot any trap disciplines, but why would anybody walk between pegs with a loaded (but open) gun?
A lot are used to relieve Trigger freeze or flinch, same sort of thing as the darts players "Yips" where the thrower cannot release the dart. Eric Bristow had it and it nearly finished his career.I'm looking at this release trigger thing and struggling to understand why you would want this?
What makes this a better option than pulling a trigger?
Thanks for the explanation but isn't it likely that these "yips" would then just affect the release?A lot are used to relieve Trigger freeze or flinch, same sort of thing as the darts players "Yips" where the thrower cannot release the dart. Eric Bristow had it and it nearly finished his career.
My mate can shoot 50-60 carts then struggles to pull the trigger, he often pulls the gun off line because of it. So he may well be looking at a release trigger.
Not necessarily, the brain associates pulling the trigger with recoil which to the brain’s way of processing is painful and is to be avoided. By using the release trigger you fool the brain into believing nothing bad happensThanks for the explanation but isn't it likely that these "yips" would then just affect the release?
Fair point, but brains also learn things as they go along. What happens when your brain learns that releasing the trigger gives you recoil, do you go back to a normal gunNot necessarily, the brain associates pulling the trigger with recoil which to the brain’s way of processing is painful and is to be avoided. By using the release trigger you fool the brain into believing nothing bad happens
Not a clueFair point, but brains also learn things as they go along. What happens when your brain learns that releasing the trigger gives you recoil, do you go back to a normal gun
It might have taken your brain 10 years to cotton on to the fact that pulling the trigger = painful recoil which is to be avoided by not cooperating. It took mine more like 50 years to start playing tricks.Not a clue
Thanks, maybe I was confusing it with release triggers on Semi-auto rifles. At my age I do get confused on an hourly basisAs Wyn says they aren't banned, but IIRC guns set up for release trigger should have visible letter "R" on the stock to inform others, particularly the ref, as extra care is needed when such a gun has to be unloaded due to say a no bird, if the trigger has been pulled but not released.
It looks like the CPSA could be heading for a U turn judging by their latest post of social media. I see they've turned comments off on facebook!
PM
For context, the latest news post, reconsidering semi-auto use for DTL & ABT.
https://www.cpsa.co.uk/news/general/2024/04/16/general-and-technical-rules-addendum-update/6026
Enter your email address to join: