1/4 bottom 3/4 top . I think I’ll be leaving it as it is , even though I’d like to take the top out to 5/8 or a 1/2 . I think there will be more future value un -butchered 
What did you do today that’s shooting related?
- Thread starter Jayzeable
- Start date
Help Support Clay, Trap, Skeet Shooting Forum:
AW13
Well-known member
I've been mulling over mine for some time as I want to open up my top barrel and I have had similar thoughts until I read the following from the current Miroku catalogue which advised that the barrel has been designed to allow personal adjustments. As soon as I can find time to visit the gunsmith I will have mine opened up to 1/4 and 1/2.1/4 bottom 3/4 top . I think I’ll be leaving it as it is , even though I’d like to take the top out to 5/8 or a 1/2 . I think there will be more future value un -butchered
El Spavo
Well-known member
Don't go confusing those cartridges now Mart! 
No problem there , my pension will only stretch to box at a time 
TheSherriff70
Well-known member
- Joined
- Mar 20, 2018
- Messages
- 123
That’s what I told myself.....Stop it
I will buy one gun, look after it and make it last, like a good boy
Everybody needs a semi, apparently....
.The 690 Black edition has matching gun slip and range bag......just saying....
That’s what I told myself.....
Everybody needs a semi, apparently....
The 690 Black edition has matching gun slip and range bag......just saying....
there’s a back edition range bag in my eBay watch list!I think you’ve got me weighed up tbh, the whole black thing actually came about because I’d originally picked out an A400 Xcel black edition (not keen on the blue anodising) but decided against one as a first gun, I thought it would be nice if/when I got one it matched the o/u
TheSherriff70
Well-known member
- Joined
- Mar 20, 2018
- Messages
- 123
I have both the slip and the range bag. Excellent quality and not badly priced at all. My mate has a 690 black and I really like it.
I think you’ve got me weighed up tbh, the whole black thing actually came about because I’d originally picked out an A400 Xcel black edition (not keen on the blue anodising) but decided against one as a first gun, I thought it would be nice if/when I got one it matched the o/u
I really like the whole black action on the 690,692,DT11 etc
I bought a Beretta Al391 Urika, which is black with synthetic stock.
New DT11EELL Black edition with lots of carbon is Gun porn!
Richard59
Well-known member
Thats just what I thought 30+ years & 5 guns agoStop it
I will buy one gun, look after it and make it last, like a good boy
once bitten ones hooked 
So I’m told! ££££££££....Thats just what I thought 30+ years & 5 guns ago
Martinj
Well-known member
Collected the above and used them on the drive back to work. First impressions - you get some brightness, as from yellow lenses, but it is tempered by the brown tint. Quite a nice combination and I'm sure they will get a lot of use.
Last edited by a moderator:
philpot
Well-known member
My pal phoned this morning to see if I fancied a drive round the perms to see what is about if anything and he brought a little .410 single barrel he picked up yesterday which he is going to have a hushpower fitted. I seriously enjoyed blasting away at a few tins, I want one now.
Phil
Phil
ips
Well-known member
- Joined
- Jul 19, 2012
- Messages
- 15,642
philpot
Well-known member
I was told that my RFD has a Mosberg pump with hushpower in stock, possibly s/h so I will be going for a look tomorrow. I also want to have a chat with 'Clay and Game' at the show to see what they have for reloading .410 shells, ideally subs.
Phil
Phil
ips
Well-known member
- Joined
- Jul 19, 2012
- Messages
- 15,642
philpot
Well-known member
Ok Ian sounds like a plan. Should be busy with friends coming down from another forum as well, looking forward to it. A weeks shooting at John Bidwell's place the week before for my wife an myself so all good.
Phil
Phil
Went to play with my new 20 bore . I’m going to shoot it for a month or two before I think about any fitting . For comparison I shot 2 boxes of 24 gm CT target load 8s , a box of 21 gm CT Target loads 8 , and at the end , a couple of handfuls of Hull High Pheasant 6 .
I’ve a couple of lessons to learn 1) auto safeties must be shoved to the firing position after every reload
2) slow down , it doesn’t need the shove that my Mk38 Trap does .
With 30gm of High Pheasant#6 on a R to L , tower bird about 25 yards out, and 25 yards up , the 1/4 kills were brilliant , the 3/4 astonishing .
On the practice layout today, even with the 21gms my eyes were opened . I think I’m going to be a 20 bore zealot from now on
I’ve a couple of lessons to learn 1) auto safeties must be shoved to the firing position after every reload
2) slow down , it doesn’t need the shove that my Mk38 Trap does .
With 30gm of High Pheasant#6 on a R to L , tower bird about 25 yards out, and 25 yards up , the 1/4 kills were brilliant , the 3/4 astonishing .
On the practice layout today, even with the 21gms my eyes were opened . I think I’m going to be a 20 bore zealot from now on
Shot a 100 practice with a couple of the team I’m joining for the pheasants this year . As I’m on trap checking duty on the shoot tomorrow rather than drive home and back and burn up thirty quids worth of diesel I found a little pub with B&B , few pints , bar meal , job sorted 
Wait till you try a 16g...Went to play with my new 20 bore . I’m going to shoot it for a month or two before I think about any fitting . For comparison I shot 2 boxes of 24 gm CT target load 8s , a box of 21 gm CT Target loads 8 , and at the end , a couple of handfuls of Hull High Pheasant 6 .
I’ve a couple of lessons to learn 1) auto safeties must be shoved to the firing position after every reload
2) slow down , it doesn’t need the shove that my Mk38 Trap does .
With 30gm of High Pheasant#6 on a R to L , tower bird about 25 yards out, and 25 yards up , the 1/4 kills were brilliant , the 3/4 astonishing .
On the practice layout today, even with the 21gms my eyes were opened . I think I’m going to be a 20 bore zealot from now on
